EB5AGV's TV-7 Supplement Data

Keep them glowing!

This is a collection of tube settings for the TV-7 testers family, along with some changes to the TV-7 Technical Manuals.

I would like to enhance this list with additional tube settings, including the ones in the official supplement pages not shown here. Please, any contribution will be welcomed!.

• TB 11-6625-274-12/1 Changes No.1, 31 May 1962: TB 11-6625-274-12/1, 17 January 1962, is changed with the following additions

  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7/U, TV-7A/U, TV-7B/U AND TV-7D/U - 31 May 1962

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  2FS5	2.5	ET1-5670	10		D	3	30
  2GK5	2.5	ET2-5076	30		C	3	38
  3AW3	3.0	HS0-0000	0	62	A	4	40	Cap connects to plate
  3BX6	3.0	EV2-7819	13		C	3	38
  3GK5	3.0	ET2-5076	30		C	3	38
  4AV6	4.3	ET1-7025	12		B	3	32	Triode Sect.
  4AV6	4.3	ET1-6025	0	0	A	2	40	Diode No. 1
  4AV6	4.3	ET1-5027	0	0	A	2	40	Diode No. 2
  5CU4	5.0	JS0-6010	0	70	A	7	32	Plate No. 1
  5CU4	5.0	JS0-4010	0	70	A	7	32	Plate No. 2
  5EW6	5.0	ET1-5627	26		B	3	52
  6DG7	6.3	EV2-7839	9		C	3	41
  6DM4	6.3	HY0-5030	0	38	A	7	50
  6DX8	6.3	EV8-6970	10		D	3	47	Pentode Sect.
  6DX8	6.3	EV1-2030	26		B	3	50	Triode Sect.
  6ET7	6.3	EV7-9860	10		D	3	38	Pentode Sect.
  6ET7	6.3	EV0-3010	0	0	A	2	20	Diode No. 1
  6ET7	6.3	EV0-2010	0	0	A	2	20	Diode No. 2
  6FD6	6.3	ET1-6572	20	20	A	2	44	Make no gas test
  6FQ5A	6.3	ET2-5070	15		D	3	50
  6FQ7	6.3	EV7-6080	23		B	3	50	Triode No. 1
  6FQ7	6.3	EV2-1030	23		B	3	50	Triode No. 2
  6GE8	6.3	EV8-9170	27		B	3	29	Pentode Sect.
  6GE8	6.3	EV3-6020	65		C	3	56	Triode Sect.
  6GK5	6.3	ET2-5076	30		C	3	38
  6GM5	6.3	EV6-9170	10		D	3	36
  6GM8	6.3	EV7-6080	30	0	A	2	32	Triode No. 1 - Make no gas test
  6GM8	6.3	EV2-1030	30	0	A	2	32	Triode No. 2 - Make no gas test
  6GX6	6.3	ET1-5627	27		B	3	21
  6GY6	6.3	ET1-5627	28		B	3	20
  6HB6	6.3	EV2-7819	10		E	3	38
  6HF8	6.3	EV7-9860	10		D	3	35	Pentode Sect.
  6HF8	6.3	EV2-3010	30		B	3	25	Triode Sect.
  8FQ7	7.5	EV7-6080	23		B	3	50	Triode No. 1
  8FQ7	7.5	EV2-1030	23		B	3	50	Triode No. 2
  10EM7	10.0	HY4-5060	20		B	3	25	Triode No. 1
  10EM7	10.0	HY1-2030	60		D	3	35	Triode No. 2
  10HF8	10.0	EV7-9860	10		D	3	35	Pentode Sect.
  10HF8	10.0	EV2-3010	30		B	3	25	Triode Sect.
  12AU8	12.6	EV7-9860	10		D	3	30	Pentode Sect.
  12AU8	12.6	EV2-3010	9		D	3	25	Triode Sect.
  12DM4	12.6	HY0-5030	0	38	A	7	50
  12GW6	12.6	HS5-0480	34		D	(1)	38	Cap connects to plate
  13FR7	12.6	EV7-6080	20		B	3	25	Triode No. 1
  13FR7	12.6	EV3-1090	60		D	3	36	Triode No. 2
  14JG8	12.6	EV8-9070	10		B	3	38	Triode Sect.
  14JG8	12.6	EV0-6010	0	70	A	2	40	Diode No. 1
  14JG8	12.6	EV0-2030	0	70	A	2	40	Diode No. 2
  15EA7	12.6	JX4-5060	10		B	3	39	Triode No. 1
  15EA7	12.6	JX1-2030	56		D	3	33	Triode No. 2
  16A5	20.0	EV2-7930	27		C	3	56	Make line test at 50
  16A8	20.0	EV3-6720	26		C	3	58	Do.
  16A8	20.0	EV1-9080	21		B	3	23	Do.
  17DM4	20.0	HY0-5030	0	38	A	7	50	Make line test at 58
  17GW6								see data following tube type 7895
  19EZ8	20.0	EV9-8000	30		B	3	20	Triode No. 1
  19EZ8	20.0	EV7-6000	30		B	3	20	Triode No. 2
  19EZ8	20.0	EV2-3010	31		B	3	24	Triode No. 3
  19HV8	20.0	EV9-6780	10		D	3	22	Pentode Sect.
  19HV8	20.0	EV1-2030	25		B	3	20	Triode Sect.
  20EZ7	20.0	CR8-7090	12		B	3	32	Triode No. 1
  20EZ7	20.0	CR5-6040	12		B	3	32	Triode No. 2
  25DK4	25.0	ET0-5070	0	65	A	7	40
  40FR5	35.0	ET2-7610	40		C	3	52
  6267	6.3	EV9-6138	28		B	3	18
  6947	6.3	DW7-8050	30		B	3	33	Triode No. 1
  6947	6.3	DW2-1040	30		B	3	33	Triode No. 2
  6948	6.3	DW7-8050	29		B	3	23	Triode No. 1
  6948	6.3	DW2-1040	29		B	3	23	Triode No. 2
  7316	12.6	EV7-6080	24		B	3	56	Triode No. 1
  7316	12.6	EV2-1030	24		B	3	56	Triode No. 2
  7408	6.3	HS5-3481	21		C	3	46
  7587	6.3	DR4-0280	10		D	(1)	38	Cap=Plate. Use Hickok adapter 1050-127
  7693	6.3	ET1-5627	15		B	3	50
  7694	6.3	ET1-5627	0		C	3	48
  7719	12.6	EV2-1030	38		C	3	14
  7724	12.6	EV8-9070	20		B	3	12	Triode Sect.
  7724	12.6	EV0-2030	0	0	A	2	32	Diode No. 1
  7724	12.6	EV0-6010	0	0	A	2	32	Diode No. 2
  7728	12.6	EV7-6080	10		C	3	50	Triode No. 1
  7728	12.6	EV2-1030	10		C	3	50	Triode No. 2
  7729	12.6	EV7-6080	12		B	3	32	Triode No. 1
  7729	12.6	EV2-1030	12		B	3	32	Triode No. 2
  7730	12.6	EV7-6080	24		B	3	56	Triode No. 1
  7730	12.6	EV2-1030	24		B	3	56	Triode No. 2
  7731	6.3	EV2-6370	15		B	3	57	Pentode Sect.
  7731	6.3	EV9-1080	16		C	3	57	Triode Sect.
  7732	6.3	ET1-5627	11		D	3	28
  7733	12.6	EV2-7813	9		D	3	46
  7895	6.3	DR4-2080	17		D	3	32	Use Hickok adapter 1050-127
  17GW6	20.0	HS5-0480	31		D	(1)	38	Cap=Plate. Make line test at 56
  								General Notes
  								Disregard shorts test after GM test is completed. Allow 60 seconds for heater warmup. Allow 5 seconds to obtain Gm readings.
  								(1) Hold down pushbutton 2-diode and press pushbutton 3-mut. cond.

  ---

• TB 11-6625-274-12/1 Changes No.3, 2 June 1966
  This change supersedes C1, 31 May 1962, and C2, 31 January 1964
  TB 11-6625-274-12/1, 17 January 1962, is changed with the following additions

  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7/U, TV-7A/U, TV-7B/U AND TV-7D/U - 2 June 1966

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  2C39	6.3	HS6-5080	18		E	3	50	TV-7/U,TV-7A/U, TV-7B/U only
  2C39	6.3	HS6-5080	78	0	F	3	50	Use adapter E107. TV-7D/U only
  2C40	6.3	HS0-0080	17		C	3	35	Cap connects to plate. Ring connects to grid
  2C42	6.3	HS0-0080	10		D	3	38	Cap connects to plate. Ring connects to grid
  2C43	6.3	HS0-0080	17		C	3	56	Cap connects to plate. Ring connects to grid
  2C45	7.5	ER3-2000	37		B	3	55
  2C46	6.3	HS0-0080	9		B	3	24	Cap connects to plate. Ring connects to grid
  2C50	12.6	HY1-2030	41		B	3	45	Triode No. 1
  2C50	12.6	HY4-5060	41		B	3	45	Triode No. 2
  2C51	6.3	KR7-6082	17		D	3	26	Triode No. 1
  2C51	6.3	KR3-4028	17		D	3	26	Triode No. 2
  2C52	12.6	HY4-5062	15		B	3	25	Triode No. 1
  2C52	12.6	HY1-2035	15		B	3	25	Triode No. 2
  2C53	6.3	HS5-0080	0		B	3	10	Cap connects to plate
  2CW4	2.0	DR4-2080	16		D	3	44	Use Hickok adapter 1050-127
  2CY5	2.5	ET1-5620	11		D	#	25	#Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2D21	6.3	ET1-6025	#	90	A	4	40	#Should strike between settings 40 and 30 of the BIAS dial
  2EA5	2.5	ET1-5620	10		D	3	26
  2EN5	2.0	ET0-7056	0	55	A	2	30	Diode No.1
  2EN5	2.0	ET0-2056	0		D	3	49	Diode No.2
  2ER5	2.0	ET2-5670	10		D	3	49
  2E5	2.5	GR5-4030	0	100	A	3		Eye open
  2E5	2.5	GR5-4230	0	100	A	3		Eye closed
  2E22	6.3	FR3-0240	0		C	3	50	Caps connects to plate
  2E24	6.3	HS5-0300	35		C	3	40	Caps connects to plate. Short on 3
  2E25	6.3	HS5-0408	0		C	3	88	Caps connects to plate
  2E26	6.3	HS5-0318	37		C	3	44	Caps connects to plate
  2E30	6.3	ET1-5602	20		C	3	88
  2E31	1.1	DV4-1200	0		B	#	10	#Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E32	1.1	DV4-1200	0		B	#	10	#Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E35	1.1	DV4-1200	18		B	#	15	#Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E36	1.1	DV4-1200	18		B	#	15	#Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E41	1.1	EW5-1200	20		B	#	10	Pentode section. #Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E41	1.1	EW0-3000	0	0	A	2	5	Diode section
  2E42	1.1	EW5-1200	20		B	#	10	Pentode section. #Hold down pushbutton 2-DIODE and press pushbutton 3-MUT.COND.
  2E42	1.1	EW0-3000	0	0	A	2	5	Diode section
  2ES5	2.5	ET2-5010	12		D	3	35
  2EV5	2.5	ET1-5620	10		D	3	43
  2FH5	2.5	ET2-5070	13		D	3	40
  2FQ5	2.5	ET2-5070	15		D	3	42
  2FS5	2.5	ET1-5670	10		D	3	30
  2FY5	2.5	ET2-5016	14		D	3	50
  2G21	1.1	EX3-2651	53	0	A	4	20	Heptode sect.
  2G21	1.1	EX3-1000	50	0	A	4	40	Triode sect.
  2G22	1.1	EX3-2651	53	0	A	4	20	Heptode sect.
  2G22	1.1	EX3-1000	50	0	A	4	40	Triode sect.
  2GK5	2.5	ET2-5076	30		C	3	38
  2T4	2.5	ET2-1050	37		D	3	25
  2V2	2.5	HS0-0050	0	45	A	4	40	Cap connects to plate. Short on 3
  2V3	2.5	HS0-0000	0	68	A	4	40	Cap connects to plate
  2W3	2.5	JS0-4000	0	0	A	7	40
  2X2A	2.5	ER0-0000	0	78	A	4	40	Cap connects to plate. Short on 3
  2Z2	2.5	ER0-2000	0	0	A	7	34
  								TABLE UNDER CONSTRUCTION!. Keep tuned for upgrades.

  ---

• T.O. 33AA21-5-31C, 15 January 1965: This Technical Order supplements T.O. 33AA21-5-31 dated 17 January 1962

  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7/U, TV-7A/U, TV-7B/U AND TV-7D/U - 15 January 1965

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  6293	6.3	HS5-0310	25		D	3	36
  6540	6.3	DU7-1265	10		D	3	22
  6850	12.6	FT6-0140	22		C	3	56	Cap above octal pins 2 and 3 connects to plate. Use Hickok adapter 1050-107. Connect negative end of a 30 V battery to pin 2 of the Loctal socket. Connect positive end of the 30 V battery to pin 4 of the Loctal socket
  6850	12.6	FT2-0140	22		C	3	56	Cap above octal pins 6 and 7 connects to plate. Connect negative end of a 30 V battery to pin 6 of the Loctal socket. Connect positive end of the 30 V battery to pin 4 of the Loctal socket. *** CAUTION *** Disconnect battery between selector changes
  6872	6.3	DU7-1265	27		B	3	45
  7308	6.3	EV7-6080	21		D	3	50	Triode No.1
  7308	6.3	EV2-1030	21		D	3	50	Triode No.2
  7868	6.3	EV2-9730	10		D	3	42	Use Hickok adapter 1050-144
  7889	25.0	DW7-8050	13		D	3	13	Triode No.1
  7889	25.0	DW2-1040	13		D	3	13	Triode No.2

  ---

• T.O. 33AA21-5-31E, 1 December 1965: This Technical Order supplements T.O. 33AA21-5-31 dated 17 January 1962

  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7/U, TV-7D/U - 1 December 1965

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  5AR4	5.0	JS0-6000	0	70	A	7	40	Plate No.1
  5AR4	5.0	JS0-4000	0	70	A	7	40	Plate No.2
  6AR11	6.3	BS4-8937	12		C	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  6AR11	6.3	BX5-2364	12		C	3	51	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  6AU4	6.3	HY0-5030	0	66	A	7	40
  6B10	6.3	BV3-4020	29		C	3	28	Triode No.1 (use Hickok adapter 1704, selectors 0-0-5)
  6B10	6.3	BS5-6070	29		C	3	28	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6B10	6.3	BS0-8090	0	53	A	2	40	Diode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6B10	6.3	BS0-8090	0	53	A	2	40	Diode No.2 (use Hickok adapter 1704, selectors 8-0-2)
  6BD11	6.3	BT5-2490	27		C	3	38	Pentode section (use Hickok adapter 1704, selectors 4-5-3)
  6BD11	6.3	BS6-8050	29		B	3	38	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6BD11	6.3	BS3-4070	24		B	3	54	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6BF11	6.3	BS8-3490	31		D	3	33	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  6BF11	6.3	BY3-7625	26		B	3	10	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-8)
  6DQ6B	6.3	HS5-0480	36		D	3	30	Cap connects to plate
  12BY7A	12.6	EV2-7813	9		D	3	46
  866	3.0	ER0-0000	0	67	A	7	40	Cap connects to plate
  6883	12.6	HS5-0318	30		D	3	35	Cap connects to plate
  7587	6.3	DR4-0280	10		D	#	38	Cap connects to plate. Use Hickok adapter 1050-127. # Hold down push button 2-DIODE and press push button 3-MUT.COND.
  7788/E810F	6.3	EV2-7938	29		C	3	50
  7854	12.6	HR6-0340	35		C	3	60	Plate No.1 : Use Hickok adapter 1050-107. Connect the negative end of a 30 V battery to pin 2 of the large 7 pin socket. Connect the positive end of the battery to pin 4 of the large 7 pin socket. Connect the plate jack connector to the cap pin over pin 6 of the octal socket. CAUTION: disconnect the battery before changing selector settings.
  7854	12.6	HR2-0340	35		C	3	60	Plate No.2 : Use Hickok adapter 1050-107. Connect the negative end of a 30 V battery to pin 6 of the large 7 pin socket. Connect the positive end of the battery to pin 4 of the large 7 pin socket. Connect the plate jack connector to the cap pin over pin 3 of the octal socket. CAUTION: disconnect the battery before changing selector settings.
  7895	6.3	DR4-2080	17		D	3	32	Use Hickok adapter 1050-127
  8032	12.6	HS5-0318	30		D	3	35	Cap connects to plate
  8077	12.6	EV2-7813	9		D	3	46

  ---

• T.O. 33AA21-5-31P, 1 March 1975: This publication supplements TO 33AA21-5-31, dated 17 January 1962, and replaces TO 33AA21-5-31M, dated 1 May 1973 and TO 33AA21-5-31N, dated 20 September 1973.

  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7/U, TV-7D/U - 1 March 1975

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  2DF4	2.5	EV8-3109	50	52	A	3	50
  2HA5	2.0	ET1-5076	30		B	3	60
  2HM5	2.0	ET1-5076	30		B	3	60
  2HQ5	2.0	ET1-5076	30		B	3	54
  3B22	2.5	ER0-2000	0	88	A	4	80	Diode No.1
  3B22	2.5	ER0-3000	0	88	A	4	80	Diode No.2
  4D32	6.3	HR6-0240	55		B	3	33	Cap=P: Use Hickok adapter 1050-107. CAUTION: with line voltage down, insert tube slowly, adjust line to normal position
  5AR4	5.0	JS0-6000	0	70	A	7	40	Plate No.1
  5AR4	5.0	JS0-4000	0	70	A	7	40	Plate No.2
  6AC10	6.3	BT9-2040	30		B	3	28	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6AC10	6.3	BS7-5060	30		B	3	28	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6AC10	6.3	BV4-2030	30		B	3	28	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6AD10	6.3	BU8-3290	37		B	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6AD10	6.3	BU3-7625	18		B	3	32	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  6AF9	6.3	FW8-1970	29		B	3	58	Pentode No.1 (use Hickok adapter 1704, selectors 1-0-0)
  6AF9	6.3	FW1-4320	28		B	3	44	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-0)
  6AF11	6.3	BV4-2390	20		C	3	63	Pentode section (use Hickok adapter 1704, selectors 3-4-5)
  6AF11	6.3	BS6-8050	27		B	3	55	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6AF11	6.3	BS3-4070	20		B	3	55	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6AG11	6.3	BS8-7090	30		B	3	42	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6AG11	6.3	BS5-6040	30		B	3	42	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6AG11	6.3	BU0-2030	0	60	A	2	35	Diode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6AG11	6.3	BU0-3020	0	60	A	2	35	Diode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  6AL11	6.3	BU8-3290	35		B	3	62	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6AL11	6.3	BV3-6724	8		B	3	18	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-5)
  6AR11	6.3	BS4-8937	12		C	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  6AR11	6.3	BX5-2364	12		C	3	51	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  6U4	6.3	HY0-5030	0	66	A	7	40
  6AV11	6.3	BT9-2040	24		B	3	56	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6AV11	6.3	BS7-5060	24		B	3	56	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6AV11	6.3	BV4-2030	24		B	3	56	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6AX3	6.3	BS0-4070	0	54	A	7	40	Use Hickok adapter 1704, set adapter selectors to 0-0-2)
  6AY3	6.3	EV0-2090	0	38	A	7	50	Use Hickok adapter 1704, set adapter selectors to 0-0-0)
  6AY11	6.3	BS8-7090	20		B	3	26	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6AY11	6.3	BS5-6040	20		B	3	26	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6AY11	6.3	BU0-2030	0	60	A	2	35	Diode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6AY11	6.3	BU0-3020	0	60	A	2	35	Diode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  6B10	6.3	BV3-4020	29		C	3	28	Triode No.1 (use Hickok adapter 1704, selectors 0-0-5)
  6B10	6.3	BS5-6070	29		C	3	28	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6B10	6.3	BS0-8090	0	53	A	2	40	Diode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6B10	6.3	BS0-8090	0	53	A	2	40	Diode No.1 (use Hickok adapter 1704, selectors 8-0-2)
  6BA11	6.3	BS4-6387	10		B	3	19	Pentode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6BA11	6.3	BW4-2385	10		B	3	19	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-6)
  6BA11	6.3	BU9-3020	33		B	3	45	Triode section (use Hickok adapter 1704, selectors 2-3-4)
  6BD11	6.3	BT5-2490	27		C	3	38	Pentode section (use Hickok adapter 1704, selectors 4-5-3)
  6BD11	6.3	BS6-8050	29		B	3	38	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6BD11	6.3	BS3-4070	24		B	3	54	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6BF11	6.3	BS8-3490	31		D	3	33	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  6BF11	6.3	BY3-7625	26		B	3	10	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-8)
  6BH11	6.3	BU8-2930	19		C	3	38	Pentode section (use Hickok adapter 1704, selectors 2-3-4)
  6BH11	6.3	BS6-7050	13		D	3	42	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  6BH11	6.3	BV4-3020	13		D	3	42	Triode No.2 (use Hickok adapter 1704, selectors 0-0-5)
  6BK4	6.3	HS0-5010	0	70	A	2	17
  6BS3	6.3	EV0-2090	0	60	A	7	42	Use Hickok adapter 1704, selectors 0-0-0
  6BW11	6.3	BU3-8927	10		D	3	30	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6BW11	6.3	BX3-5426	26		B	3	52	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  6C10	6.3	BT9-2040	12		B	3	32	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6C10	6.3	BS7-5060	12		B	3	32	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6C10	6.3	BV4-2030	12		B	3	32	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6CJ3	6.3	EV0-2090	0	70	A	7	40	Use Hickok adapter 1704, selectors 0-0-0
  6D10	6.3	BT9-2040	29		B	3	34	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6D10	6.3	BS7-5060	29		B	3	34	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6D10	6.3	BV4-2030	29		B	3	34	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6DQ6B	6.3	HS5-0480	36		D	3	30	Cap connects to plate
  6DW4	6.3	EV0-2090	0	66	A	7	40	Use Hickok adapter 1704, selectors 0-0-0
  6EH4	6.3	BS0-6050	0	70	A	2	17	Cap=G. Use Hickok adapter 1704, selectors 0-0-2
  6GE5	6.3	BV4-7230	36		D	3	30	Use Hickok adapter 1704, selectors 3-4-5
  6CJ7	6.3	EV2-6710	25		B	3	60	Pentode section
  6CJ7	6.3	EV9-8030	40		B	3	44	Triode section
  6GV5	6.3	BU9-0320	36		D	3	30	Cap=Plate. Use Hickok adapter 1704, selectors 2-3-4
  6HA5	6.3	ET1-5076	30		B	3	60
  6HM5	6.3	ET1-5076	30		B	3	60
  6HQ5	6.3	ET1-5076	30		B	3	54
  6J11	6.3	BU3-9782	26		B	3	52	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6J11	6.3	BX5-3264	26		B	3	52	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  6JB6	6.3	EV2-0138	34		D	#	38	Cap=Plate. Use Hickok adapter 1704, selectors 0-0-0. #Hold down push button 2-DIODE and press button 3-MUT.COND.
  6JE6	6.3	EV2-0738	53		D	3	34	Cap=Plate. Use Hickok adapter 1704, selectors 0-0-0
  6JF6	6.3	EV2-0138	55		D	3	45	Cap=Plate. Use Hickok adapter 1704, selectors 0-0-0
  6JM6	6.3	BW5-0324	48		D	3	32	Cap=Plate. Use Hickok adapter 1704, selectors 4-0-6
  6JN6	6.3	BW5-7324	48		D	3	32	Use Hickok adapter 1704, selectors 0-5-6
  6JS6	6.3	BW5-0324	82		C	3	52	Cap=Plate. Use Hickok adapter 1704, selectors 0-0-6
  6JU8	6.3	EV0-8090	0	70	A	2	40	Diode No.1
  6JU8	6.3	EV0-7080	0	70	A	2	40	Diode No.2
  6JU8	6.3	EV0-2030	0	70	A	2	40	Diode No.3
  6JU8	6.3	EV0-1020	0	70	A	2	40	Diode No.4
  6K11	6.3	BT9-2048	24		B	3	56	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6K11	6.3	BS7-5068	12		B	3	32	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6K11	6.3	BV4-2038	12		B	3	32	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6KT6	6.3	EV2-7819	22		C	3	52
  6KT8	6.3	EV7-9860	15		C	3	57	Pentode section
  6KT8	6.3	EV2-3010	26		B	3	38	Triode section
  6LC6	6.3	HS0-5061	0	70	A	2	17	Cap=Grid
  6LF6	6.3	BW5-0324	70		D	3	38	Cap=Plate. Use Hickok adapter 1704, selectors 0-0-6
  6LQ8	6.3	EV7-9860	32		B	3	40	Pentode section
  6LQ8	6.3	EV2-3010	33		B	3	35	Triode section
  6Q11	6.3	BT9-2048	24		B	3	56	Triode No.1 (use Hickok adapter 1704, selectors 2-0-3)
  6Q11	6.3	BS7-5068	12		B	3	32	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  6Q11	6.3	BV4-2038	12		B	3	32	Triode No.3 (use Hickok adapter 1704, selectors 0-4-5)
  6T10	6.3	BU8-3290	35		B	3	62	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  6T10	6.3	BU3-7625	8		B	3	18	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  7GV7	7.5	EV7-3280	29		B	3	33	Pentode section
  7GV7	7.5	EV9-1080	38		C	3	47	Triode section
  7HG8	7.5	EV2-8930	25		?	3	55	Pentode section
  7HG8	7.5	EV6-7030	44		?	3	30	Triode section
  8A8	10.0	EV2-6371	19		C	3	34	Pentode section
  8A8	10.0	EV9-1086	34		C	3	36	Triode section
  8AR11	7.5	BS4-8937	12		C	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  8AR11	7.5	BX5-2364	12		C	3	51	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  8BA11	7.5	BS4-6387	10		B	3	19	Pentode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  8BA11	7.5	BW4-2385	10		B	3	19	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-6)
  8BA11	7.5	BU9-3020	33		B	3	45	Triode section (use Hickok adapter 1704, selectors 2-3-4)
  8BM11	7.5	BU3-7928	20		C	3	40	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  8BM11	7.5	BX6-2354	25		C	3	31	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  9A8	10.0	EV2-6371	19		C	3	34	Pentode section
  9A8	10.0	EV9-1086	34		C	3	36	Triode section
  9KZ8	10.0	EV2-6370	19		C	3	38	Pentode section
  9KZ8	10.0	EV9-1080	13		D	3	42	Triode section
  10JA8	10.0	EV7-9860	27		C	3	32	Tetrode section
  10JA8	10.0	EV2-3010	27		B	3	39	Triode section
  10JY8	10.0	EV7-9860	20		C	3	63	Pentode section
  10JY8	10.0	EV2-3010	33		B	3	35	Triode section
  11AR11	10.0	BS4-8937	12		C	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  11AR11	10.0	BX5-2364	12		C	3	51	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  11BQ11	10.0	BS4-8937	12		C	3	51	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  11BQ11	10.0	BX5-2364	26		B	3	52	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-7)
  11BT11	10.0	BV4-2386	32		B	3	45	Pentode section (use Hickok adapter 1704, selectors 3-4-5)
  11BT11	10.0	BS5-7060	23		C	3	29	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  11BT11	10.0	BS3-9040	20		C	3	43	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  11CA11	10.0	BU8-3297	30		C	3	37	Pentode section (use Hickok adapter 1704, selectors 2-3-4)
  11CA11	10.0	BS6-4050	25		C	3	45	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  11CA11	10.0	BU3-2070	23		C	3	29	Triode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  11FY7	10.0	BU2-3090	22		B	3	20	Triode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  11FY7	10.0	BS3-5070	54		D	3	38	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  11HM7	10.0	EV2-7819	13		D	3	61
  11LQ8	10.0	EV7-9860	32		B	3	40	Pentode section
  11LQ8	10.0	EV2-3010	33		B	3	35	Triode section
  11LT8	10.0	EV9-3216	10		D	3	38	Pentode section
  11LT8	10.0	EV0-8070	0	70	A	2	40	Diode No.1
  11LT8	10.0	EV0-6070	0	70	A	2	40	Diode No.2
  12AX3	12.6	BS0-4070	0	54	A	7	40	Use Hickok adapter 1704, selectors 0-0-2
  12BF11	12.6	BS8-3490	31		D	3	33	Pentode No.1 (use Hickok adapter 1704, selectors 4-3-2)
  12BF11	12.6	BY3-7625	26		B	3	10	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-8)
  12BS3	12.6	EV0-2090	0	60	A	7	42	Use Hickok adapter 1704, selectors 0-0-0
  12BY7A	12.6	EV2-7813	9		D	3	46
  12T10	12.6	BU8-3290	35		B	3	62	Pentode No.1 (use Hickok adapter 1704, selectors 2-3-4)
  12T10	12.6	BU3-7625	8		B	3	18	Pentode No.2 (use Hickok adapter 1704, selectors 0-0-4)
  14BL11	12.6	BV4-2380	32		B	3	45	Pentode section (use Hickok adapter 1704, selectors 3-4-5)
  14BL11	12.6	BS5-7060	23		C	3	29	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  14BL11	12.6	BS3-9040	20		C	3	43	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  14BR11	12.6	BW2-5340	27		C	3	38	Pentode section (use Hickok adapter 1704, selectors 0-5-6)
  14BR11	12.6	BS8-6050	29		B	3	38	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  14BR11	12.6	BT2-9070	24		B	3	54	Triode No.2 (use Hickok adapter 1704, selectors 2-0-3)
  15AF11	12.6	BS6-8050	27		B	3	55	Triode No.1 (use Hickok adapter 1704, selectors 0-0-2)
  15AF11	12.6	BS3-4070	20		B	3	55	Triode No.2 (use Hickok adapter 1704, selectors 0-0-2)
  15BD11	12.6	BV4-2390	27		C	3	38	Pentode section. MAKE LINE TEST AT 64. Use Hickok adapter 1704, selectors 3-4-5
  15BD11	12.6	BS6-8050	29		B	3	38	Triode No.1. MAKE LINE TEST AT 64. Use Hickok adapter 1704, selectors 0-0-2
  15BD11	12.6	BS3-4070	24		B	3	54	Triode No.2. MAKE LINE TEST AT 64 .Use Hickok adapter 1704, selectors 0-0-2
  17AX3	20.0	BS0-4070	0	54	A	7	40	MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 0-0-2
  17BE3	20.0	BT0-2070	0	66	A	7	40	MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 2-0-3
  17BF11	20.0	BU8-3290	31		D	3	33	Pentode No.1. MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 2-3-4
  17BF11	20.0	BU3-7625	26		B	3	10	Pentode No.2. MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 0-0-4
  17BS3	20.0	EV0-2090	0	60	A	7	42	MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 0-0-0
  17GV5	20.0	BU9-3020	36		D	3	30	Cap=P. MAKE LINE TEST AT 56. Use Hickok adapter 1704, selectors 2-3-4
  866	3.0	ER0-0000	0	67	A	7	40	Cap connects to Plate
  6293	6.3	HS5-0310	25		D	3	36
  6384	6.3	GY7-3510	34		D	3	27
  6540	6.3	DU7-1265	10		D	3	22
  6850	12.6	FT6-0140	22		C	3	56	Cap above octal pins 2 and 3 connects to plate. Use Hickok adapter 1050-107. Connect negative (-) end of a 30V battery to pin 2 of the Loctal socket
  6850	12.6	FT2-0140	22		C	3	56	Cap above octal pins 6 and 7 connects to plate. Use Hickok adapter 1050-107. Connect negative (-) end of a 30V battery to pin 6 of the Loctal socket. Connect positive (+) end of the 20V battery (Eveready 413) to pin 4 of the Loctal socket for each test. CAUTION: disconnect battery between selector changes
  6872	6.3	DU7-1265	27		B	3	45
  6883	12.6	HS5-0318	30		D	3	35	Cap connects to plate
  7289	6.3	HS6-5080	18		E	3	50	TV-7/U, TV-7A/U, TV-7B/U Use adapter E107
  7289	6.3	HS6-5080	78		F	3	50	TV-D7/U Use adapter E107
  7308	6.3	EV7-6080	21		D	3	50	Triode No.1
  7308	6.3	EV2-1030	21		D	3	50	Triode No.2
  7587	6.3	DR4-0280	10		D	#	38	Cap connects to plate. Use Hickok adapter 1050-127. #Hold down push button 2-DIODE and press push button 3-MUT.COND.
  7788 E810F	6.3	EV2-7938	29		C	3	50
  7854	12.6	HR6-0340	35		C	3	60	Plate No.1 Use Hickok adapter 1050-107. Connect the negative end of a 30V battery to pin 2 of the large 7.pin socket. Connect the positive end of the battery to pin 4 of the large 7-pin socket. Connect the plate jack connector to the cap pin over pin 6 of the octal socket
  7854	12.6	HR2-0340	35		C	3	60	Plate No.2 Use Hickok adapter 1050-107. Connect the negative end of a 30V battery to pin 6 of the large 7.pin socket. Connect the positive end of the battery to pin 4 of the large 7-pin socket. Connect the plate jack connector to the cap pin over pin 3 of the octal socket. CAUTION: disconnect the battery before changing selector settings
  7868	6.3	EV2-9730	10		D	3	42	Use Hickok adapter 1050-144
  7889	25.0	DW7-8050	13		D	3	13	Triode No.1
  7889	25.0	DW2-1004	13		D	3	13	Triode No.2
  7895	6.3	DR4-2080	17		D	3	32	Use Hickok adapter 1050-127
  7905	6.3	BZ2-6307	50	47	A	3	50
  7984	12.6	BS3-5678	45		D	3	27	Use Hickok adapter 1704, selectors 5-0-4
  8032	12.6	HS5-0318	30		D	3	35	Cap connects to plate
  8077	12.6	EV2-7813	9		D	3	46
  8532	6.3	ET1-7020	15		D	3	45
  							The following tubes CANNOT BE TESTED for the reasons stated: 5783WA - voltage reference tube. Model TV-7/U not suitable 5960 - required voltage and current not available in TV-7/U 6528 - too high powered to test 6798 - TR tube. Model TV-7/U not suitable 7077 - ceramic metal planar triode. Requires adapter not available 7815 - tube rated for pulse operations. Model TV-7/U not suitable

  ---

• T.O. 33AA21-5-31Q, 5 September 1975: This Publication supplements T.O. 33AA21-5-31 dated 17 January 1962

  SUPPLEMENT
  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7( )/U - 5 September 1975

  1. PURPOSE: This supplement is issued to change a filament in Data Table

  2. INSTRUCTIONS: Page 19, Tube Type 6AU8: Change Filament 6.8 to 6.3 (Pentode sect.)

  ---

• T.O. 33AA21-5-31R, 15 June 1983: This Publication supplements T.O. 33AA21-5-31 dated 17 January 1962

  SUPPLEMENT
  TECHNICAL MANUAL
  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7( )/U - 15 June 1983

  1. PURPOSE: The purpose of this supplement is to ammend the basic publication

  2. INSTRUCTIONS: Page 39, on second line change tube type 13BE6 to 12BE6

  ---

• T.O. 33AA21-5-31S, 31 May 1985: This Publication supplements T.O. 33AA21-5-31 dated 17 January 1962

  SUPPLEMENT
  TECHNICAL MANUAL
  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7( )/U - 31 May 1985

  1. LIST OF AFFECTED PAGES IN BASIC MANUAL: 71

  2. SUPPLEMENTAL INFORMATION: Page 71, change first line, Tube Type Number '6320' to read '6360'

  ---

• T.O. 33AA21-5-31T, 15 December 1986: This Publication supplements T.O. 33AA21-5-31 dated 17 January 1962

  SUPPLEMENT
  TECHNICAL MANUAL
  TEST DATA FOR ELECTRON TUBE TEST SETS TV-7( )/U - 15 December 1986

  1. LIST OF AFFECTED PAGES IN BASIC MANUAL: 70

  2. SUPPLEMENTAL INFORMATION: Page 70, DATA TABLE, after Tube Type 6293 add the following:

  Tube type	Filament	Selectors	Bias	Shunt	Range	Press	Minimum value	Notations
  6336	6.3	HY4-5062	100		C	3	36	Triode No.1
  6336	6.3	HY1-2035	100		C	3	36	Triode No.2

  ---

  Changes to the Technical Manuals

  ---

• T.O. 33AA21-5-32S-1, 20 September 1973: This Publication supplements T.O. 33AA21-5-32 dated 30 June 1960

  OPERATIONAL SUPPLEMENT
  TECHNICAL MANUAL
  FIELD AND DEPOT MAINTENANCE MANUAL
  TEST SETS, ELECTRON TUBE TV-7( )/U - 20 September 1973

  Page 48A, Chart under paragraph 36, Step 2, second column 'Equipment under test control settings' is ammended as follows: No change from end of Step 1, except: Selector switches: Grid: 5 Plate: 3 Screen: 4 Cathode: 6 Suppressor: 0 Function switch: A

  ---

• T.O. 33AA21-5-32S-2, 25 January 1978: This Publication supplements T.O. 33AA21-5-32 dated 30 June 1960

  OPERATIONAL SUPPLEMENT
  TECHNICAL MANUAL
  FIELD AND DEPOT MAINTENANCE MANUAL
  TEST SETS, ELECTRON TUBE TV-7( )/U - 25 January 1978

  Add the following statement to the basic technical manual: All connector plugs (P101) and power cords will be wired in accordance with T.O. 33-1-32

  ---

• More info will be ready soon!. Please, any contribution will be welcomed.

Go back to TV-7 Page